Repair and Sealing Material for Tyres and Tubes
Tip Top Sobeltop - Repair & Sealing - 39 - REPAIR AND SEALING MATERIAL FOR TYRES AND TUBES 
REPAIR RUBBER 

MTR SUPER FINISH RUBBER 
•
 Uncured rubber compound for excellent surface finish particularly in the tyre sidewall area 

•
 Good flowing and vulcanizing characteristics 

•
 Required vulcanizing temperature: at least 100 °C (212°F) 

•
 Max. temperature for warming up MTR SUPER FINISH RUBBER 80 °C (176 °F) 

•
 Use only with Solution MTR 




Ref. No.  Description  Size  Weight  Content  Qty  
516 0980  MTR SUPER FINISH RUBBER,  Ø 8 mm  approx. 12 kg  1 rope  1  
rope for extruder  


MTR-CR RUBBER 
•
 Uncured rubber for increased wear and cut resistance 

•
 Required vulcanizing temperature: at least 100 °C (212 °F) The skive can be filled with MTR-CR RUBBER only or in combination with MTR RUBBER 

•
 If working with two compounds, use MTR-CR RUBBER as a protector above the casing 

•
 Please only use with Solution MTR 

•
 CR = cut resistant 



Ref. No.
 Description 
Size 
Weight 

Content 
Qty 
516 1180 
MTR-CR, rope for extruder 
Ø 8 mm 
approx. 12 kg 

1 rope 
1 


MTR CUSHION GUM 

•
 Cushion gum for laminating REMA TIP TOP repair patches prior to vulcanization in retreading systems/vulcanizing machines at an operating temperature of over 100°C (212°F) 

•
 The excellent initial tack and ageing stability under thermal stress ensure improved adhesion even when used in open steam autoclaves or long curing processes 


•
 Please use MTR cushion gum with Solution MTR only! 516 1009 



Ref. No.
 Description 
Size 
Weight 
Content 
Qty 
516 1009 
MTR cushion gum 
approx. 1 x 500 x 8000 H x W x L mm 
approx. 5 kg 
1 roll 
1 

39 TYRE REPAIR MATERIAL
REPAIR AND SEALING MATERIAL FOR TYRES AND TUBES REPAIR RUBBER MTR SUPER FINISH RUBBER • Uncured rubber compound for excellent surface finish particularly in the tyre sidewall area • Good flowing and vulcanizing characteristics • Required vulcanizing temperature: at least 100 °C (212°F) • Max. temperature for warming up MTR SUPER FINISH RUBBER 80 °C (176 °F) • Use only with Solution MTR Ref. No. Description Size Weight Content Qty 516 0980 MTR SUPER FINISH RUBBER, Ø 8 mm approx. 12 kg 1 rope 1 rope for extruder MTR-CR RUBBER • Uncured rubber for increased wear and cut resistance • Required vulcanizing temperature: at least 100 °C (212 °F) The skive can be filled with MTR-CR RUBBER only or in combination with MTR RUBBER • If working with two compounds, use MTR-CR RUBBER as a protector above the casing • Please only use with Solution MTR • CR = cut resistant Ref. No. Description Size Weight Content Qty 516 1180 MTR-CR, rope for extruder Ø 8 mm approx. 12 kg 1 rope 1 MTR CUSHION GUM • Cushion gum for laminating REMA TIP TOP repair patches prior to vulcanization in retreading systems/vulcanizing machines at an operating temperature of over 100°C (212°F) • The excellent initial tack and ageing stability under thermal stress ensure improved adhesion even when used in open steam autoclaves or long curing processes • Please use MTR cushion gum with Solution MTR only! 516 1009 Ref. No. Description Size Weight Content Qty 516 1009 MTR cushion gum approx. 1 x 500 x 8000 H x W x L mm approx. 5 kg 1 roll 1 39 TYRE REPAIR MATERIAL